Fan coil units widely used in cases of multiroom buildings where independent conditions control is required and at the same time it is desirable to operate on a centralized system of chilled and hot water supply.

Interklima fan coil units feature high-quality construction to meet the most demanding installations. Both 2-pipe and 4-pipe systems can be specified along with several different valve packages.

Designed with economy in mind, these fan coil units incorporate energy efficient fan motors with low operating cost.

The basic unit is fabricated of no less than 1.2 mm thick (18 gauge) galvanized steel and acoustically and thermally insulated with no less than 6 mm Frelen. Exposed models (FC, CC) are enclosed with prepainted and baked cabinet of light beige colour and protected with a transparent vynil film. The cabinet is easily opened to allow easy access to internal components.

Coils are of 2-row, 3-row, 4-row or 3-row+1-row split constructed of copper tubes with mechanically bonded aluminium plate fins, with bronze headers and shall be suitable for working pressures up to 17.5 kg/cm² (250 psig). The coils have manual air vent.

Fans are centrifugal, forward curved, multiblade, double- width, double-inlet and of aluminium construction, each statically and dynamically balanced. The fan housing is made of galvanized steel and the housing sides of special synthetic material. The inlet cones are aerodynamically formed to avoid turbulance, easily removable.

Filters are of the washable type. The material is cleanable, fire retardant and fixed into galvanized frame.

Drain pan is of welded construction with minimum 6 mm Frelen insulated externally. All welded joints are anticorrosion painted, and inside are epoxy coated.

The motors are totally enclosed, permanent split capacitor type provided with three speed tapped winding, Single phase 220-240V1/50 volt, resilient mounted.