INTERKLIMA is the largest manufacture and supplier of plate fin type coils in Greece, with a fully automated production line and with a great variety in designs and sizes of water and DX coils.

INTERKLIMA’s experience in designing and building coils spans more than 20 years.

Today’s coils for our MD series air handling units are a combination technology. As a result, every INTERKLIMA coil built today is of absolute highest quality, scientifically matched application and rating specifications.

The coils for our MD series air handling units are fabricated of 3/8” OD copper tubes. Finned surface is available in either copper or aluminum and all joints are made using high temperature alloys for extra reliability. All coils featuring the new corrugated finned surface have tubes mechanically expanded into continuous fins integral spacing collars. This is a proven manufacturing technique, which results in positive fin and tube contact for maximum heat transfer,

The coil casings are of galvanized steel. All water coil headers are fabricated from rugged schedule 40 steel pipe (optional non-ferrous or copper headers are available). Headers are covered with anticorrosion paint.

Quality control: INTERKLIMA coils are checked at virtually every step of the manufacturing process to assure you of the most final quality control check. Each and every coil is pressurized to 400 psig and submerged in water testing tank.

After the coil is assembled on the drain pan, the whole assembly slides on the unit guide rails to its final position. The inlet and outlet coil connections, as well as the drain connection, are sealed on the casing with neoprene gaskets.

DROP ELIMINATORS for cooling coils are made of special shaped PVC profiles, to secure drop elimination even in high air velocities and they are permanently fixed through spacers on a rigid, galvanized or st. steel frame.